6 Ton Crane

1. Product Introduction:

 

HD European type Single girder overhead 6 ton crane is designed according to the European FEM standard, the main beam is a square box structure, and the ND type European wire rope electric hoist is used together, with light weight, small wheel pressure, small limit size, reliable performance, low noise, low energy consumption, easy operation and so on.

 
HD European type Single girder overhead 6 ton crane is used in conjunction with European-style wire rope electric hoist, with a rated lifting capacity of 3.2t~16t.

 

 

2. Parameters:

 

Lifting Weight(t)	1				2				3				5				10				20				Customized
Span(m)	7.5	10	15	18	8	13	18	27	7.5	12	18	23	8	12	15	18	8	12	15	20	10	16	19	26	Customized
Working Speed (m/min)	Customized
Model of Electric Hoist	Electric European Wire Rope Hoist Trolley
Lifting Speed(m/min)	Customized
Hoisting Height(m)	Customized
Working Class	A5-A6
Electric Current	Three-phase AC 380V 50Hz or Customized

 

3. Component:

 

① Lifting mechanism

It is composed of motor, brake, reducer, reel unit, fixed pulley unit, hook unit, lifting limit, transmission shaft, coupling, etc.

② The operating mechanism is composed of a motor, a brake, a reducer, a transmission shaft, a coupling, and a wheel set. Small cars are mostly driven centrally, while large cars are mostly driven separately.

③ Bridge structure

It consists of main beam, end beam, walking platform, cable slide, driver's cab, ladder railing platform, etc.

④ Control mechanism and electrical control equipment

It consists of linkage table or cam controller, protection cabinet, power box, resistor, cart conductor and limit switches, etc.

 

4. Applicable Environment:

HD European type Single girder overhead 6 ton crane are widely used in workshops, warehouses and other material handling occasions in machinery manufacturing, metallurgy, petroleum, petrochemical, ports, railways, civil aviation, electric power, food, papermaking, building materials, electronics and other industries. It is especially suitable for material handling, precision assembly of large parts and other occasions that require precise positioning, and the working environment temperature is -25-40 ℃. It is forbidden to use in flammable and corrosive media environment.

5. Precautions for lifting, transportation and storage

Since the crane is a major component, special lifting equipment is required during lifting. It is necessary to avoid failures such as bridge deformation and component damage caused by unreasonable lifting, transfer and storage of the crane.

 

① When hoisting, follow the lifting lines marked on the equipment;

 

② Unmarked lifting lines should be lifted at the symmetrical point of the center of gravity of the equipment;

 

③ The lifting point should be rigid enough, and the lifting part should be padded with wood, rubber or other buffers to prevent the lifting wire rope from directly contacting the hanging object and pulling the equipment.
hurt;

 

④ When storing, it should be supported by a support frame of sufficient strength and stored according to the working condition of the bridge;

 

Hot Tags: 6 ton crane, China 6 ton crane suppliers, manufacturers, factory