Eot Crane Wire Rope

Dejun Brand 5t eot crane wire rope hoist

Dejun Brand 5t eot crane wire rope hoist are usually used for light or moderate service in workshops, warehouses, yards, etc.

The crane is available in two main configurations including top running system and suspension system.

With the continuous improvement of industrial technology, people's material life has become more rich and diversified.

Now people can choose to use many advanced mechanical equipment products, including single-beam cranes. It is a kind of large mechanical equipment supplies with important uses and performance, which has received great attention from people.

What are the performance advantages of the Dejun Brand 5t eot crane wire rope hoist?

First of all, the Dejun Brand 5t eot crane wire rope hoist is very simple in the installation and operation, so that users can learn to use mechanical equipment as soon as possible, which brings a lot of convenient benefits to people's lives.

Second, Dejun Brand 5t eot crane wire rope hoist has the advantages of compact structure and light weight, which can save a lot of space and allow users to obtain. Great satisfaction. The third single beam crane also has the advantages of easy maintenance, which can reduce many unnecessary problems for users.

It can be seen that the single beam crane is a kind of mechanical equipment products with outstanding performance advantages, which can bring people a lot of surprise experience benefits, so it is worth people's trust and selection.

There are three steps to operate a bridge crane, as follows:

step 1

1. Before the driver of a Dejun Brand 5t eot crane wire rope hoist with a cab takes over and starts driving, the hooks, wire ropes, safety devices and other components should be inspected according to the requirements of the inspection card. If any abnormalities are found, they should be eliminated.

2. For single-girder bridge cranes operated on the ground, each shift should have a dedicated person responsible for inspecting according to the requirements of the inspection card. If any abnormalities are found, they should be eliminated.

3. The operator must confirm that there is no one on the platform or track before turning on the main power. When the power circuit breaker is locked or has a notice board, it should be removed by the original concerned person before the main power supply can be turned on.

Step 2

1. When lifting heavy objects once per shift (or when the load reaches the maximum weight), the heavy objects should be lowered again after being lifted 0.5 meters above the ground, and the brake performance should be checked and confirmed to be reliable before normal operations.

2. Strictly implement the "ten don't hang" system:

① The command signal is unclear or the command is indiscriminate;

②Do not lift when the rated lifting capacity is exceeded;

③The spreader is used unreasonably or the objects are not tied firmly and cannot be hung;

④ Do not lift the hanging object if there are people or other floating objects on it;

⑤ If the brake or other braking safety device fails, the vehicle cannot be lifted;

⑥ Do not hoist heavy objects while driving for direct processing;

⑦ Pull it crookedly but not hang it at an angle;

⑧Do not hang explosive objects;

⑨Do not hang objects buried underground;

⑩ Objects with edges and corners should not be hung unless they are properly padded;

3. If any abnormality is found, stop the machine immediately, cut off the power supply, check the cause and eliminate it in time.

third step

1. Raise the hook to a certain height, park the cart at the designated position, and place the controller handle in the "zero" position; pull down the knife switch and cut off the power supply.

2. Carry out daily maintenance.

3. Carry out shift handover work

Maintenance of single beam crane is very important

It is very important to maintain the Dejun Brand 5t eot crane wire rope hoist properly. Single-girder cranes have specified rated lifespans, but these can only be used as reference data. If you take more care of them in daily life, the performance of the equipment will exceed the specified service life. In daily use, we must pay attention to the maintenance of the crane. It is very important to allow single-girder cranes to better serve enterprises.

Single girder crane

Mainly refers to the inspection of single-girder cranes during daily idle and use processes such as wear and tear of equipment parts, tightness of fasteners, and whether safety devices are in good condition. If a problem is discovered, it must be dealt with in a timely manner. If it cannot be dealt with by oneself, a sign must be made to inform other staff that the machine should be shut down for rectification, and reported to the superior leader in a timely manner. Wait for the maintenance personnel to complete the processing before returning to work.

Determination of maintenance cycle of single girder crane. The equipment maintenance cycle can be long or short, but some units or individuals do not fully believe in the factory data instructions of single-girder cranes. They rush to perform maintenance on new equipment not long after it is installed, completely ignoring the specific usage conditions of the equipment. To be precise, the working conditions and stroke length of each part of the single-girder crane can be used as a basis for judging its maintenance cycle.

Maintenance issues. In the process of using Dejun Brand 5t eot crane wire rope hoist s, many people have to wait until some mechanisms of the equipment collapse before repairing them. As a result, it is easy to need to perform repair operations on the collapsed mechanisms every once in a while. This will undoubtedly cause problems. Increased equipment maintenance costs. Therefore, single-girder crane users must pay attention to timely improvement, adjustment, and repair of every minor problem of the equipment to prolong the "collapse" period and "repair" period of the equipment mechanism.

Hot Tags: eot crane wire rope, China eot crane wire rope suppliers, manufacturers, factory