Building Bridge Crane

1. Product Introduction:

 

Electromagnetic building bridge crane is widely used to transport, assemble, load and unload incompact goods in mine, port, factory, workshop, warehouses, and goods yard, etc. Grab,Bucket,Grapple open direction is divided into parallel and vertical with main beam.The winch trolley wiht Magnet,Magnetic,Electromagnetic Chuck and the grab can be double or four wire rope, mechanical or electric hydraulic type according to different work duty and materials.

 

The lifting equipment Electromagnetic building overhead crane belongs to the heavy-duty A5-A8 working system, and the crane includes the self-weight of the electro-magnetic disk.

 

2. Parameters:

Lifting Weight(t)			5		10			16
Span(m)			Customized
Max. Lifting Height(m)			16		16			16
Speed (m/min)	Hoisting	Electromagnetic	15.6		13			13
	Travelling of Crab		39.5		43.8			44.5
	Travelling of Trolley		92.7	93.7	92.7	93.7	86.4	76	89
Working Class			A5-A8
Electric Current			Three-phase AC 380V 50Hz or Customized

3. Component:

 

Weight overload protection; Emergency stop system; Over current protection, Short-circuit protection; Phase sequence protection; Zero position protection; Voltage loss protection; Limit switch and stopper for crane long traveling and cross traveling; Lifting overhigh and overlow limit switch Six direction movement.

 

The main beam is a box-shaped structure on the right track to ensure that it has sufficient strength, rigidity and overall stability. Submerged arc welding or gas shielded welding is used for the transverse butt welds of the cover plates and webs of the main beam and the end beams, and the connection welds between the webs and the cover plates. After welding, check the welding seam in accordance with the regulations of "General Overhead Crane".

 

The end beam is a box-shaped structure, and the connection between the end beam and the main beam is a rigid connection. In order to facilitate transportation, the end beams are disconnected, high-strength bolts are used to connect the end beams, and reamed bolts are used for positioning on each connecting plate, and the positioning check mark has been made before leaving the factory.

 

The cart running mechanism is supported by four wheels as the crane, and two sets of independent drive systems are used to drive the crane respectively; the trolley running mechanism is supported by four wheels, and an independent drive system is used to drive the trolley centrally.

 

4. Applicable Environment:

 

Electromagnetic building bridge crane is suitable for heavy loading and unloading and handling of magnetic ferrous metal products and materials (such as steel ingots, section steel, and pig iron blocks) in fixed spans indoors or in the open air in metallurgical plants. It is also commonly used in machinery factories and warehouses to transport steel, iron blocks, scrap iron, scrap steel, iron filings and other materials.

 

This Electromagnetic building overhead crane is generally not used in places with high temperature (>+40℃) and low temperature (<-20℃). If the ambient temperature exceeds the above range, it should be handled according to special requirements. The normal temperature electromagnet is used for lifting and transporting metals below +100°C, and the high-temperature electromagnet is used for lifting and transporting metals below +600°C, and cannot be used for lifting and transporting molten metals. Not for use in workplaces with strong corrosive chemical gases.

5. Wearing Parts:

 

The wearing parts of Electromagnetic building bridge crane include Load limiter, Coupling, Brake and Current collectors.

 

6. Electromagnetic building bridge crane Features

 

Our Electromagnetic building overhead crane is a robust machine that boasts many features to make your lifting operations more efficient. Here are some of the key features that set it apart from other lifting equipment:

 

① Two lifting mechanism, one is for the grab, bucket, grapple; the other is for magnet, magnetic, electromagnetic plate.

 

② Simple structure in linear type, easy in installation and maintain.

 

③ Heavy duty, soft start, 3-5 speeds to operate, very stable to lift and running.

 

④ Strong box type steel structure.

 

⑤ Full safety system as follows:

 

7. Working principle and performance of Electromagnetic building bridge crane

 

A machine that uses electromagnetism to move iron and steel objects.

 

The main part of the Electromagnetic bridge crane is the magnet. When the current is turned on, the electromagnet will firmly attract the iron and steel objects and lift them to the designated place.

 

Cut off the current, the magnetism disappears, and the steel object is put down.

 

The Electromagnetic building crane is very convenient to use, but it must have an electric current before it can be used. It can be used in scrap iron and steel recycling departments and steelmaking workshops.

 

A device that uses electromagnets to carry steel materials is called an electromagnetic crane.

 

The Electromagnetic overhead crane can generate a strong magnetic field force. Iron sheets, iron wires, iron nails, scrap iron and other various iron materials weighing tens of tons can be collected and transported conveniently without boxing, packing or binding. The operation is labor-saving and the work is simplified. Steel materials and machines packed in wooden boxes can be handled in the same way.

 

Note: Cranes cannot handle hot iron, because hot steel cannot be magnetized.

 

8. Frequently Asked Questions about Electromagnetic building bridge crane:

 

(1) What's your warranty period?

Within 12 months after you receive the goods;

 

(2) Do you have engineer oversea installation service?

Yes; we have

 

(3) Where is Your Factory? May I visit Your Factory?

Xinxiang city, Henan Province. We can pick up you at the train station or airport, and book hotel for your in advance, if you visit our factory.

 

(4) How can I make payment?

We accept T/T bank transfer, L/C, Paypal.

For regular clients, we could provide more supportive payment term.

 

(5) What about shipping?

We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.

 

Hot Tags: building bridge crane, China building bridge crane suppliers, manufacturers, factory