Bridge Crane Electrification Systems

1. Product Introduction:

 

The Bridge crane electrification systems mostly adopts I-shaped steel or a combined section of steel profile and steel plate. Lifting trolleys are often assembled with hand chain hoists, electric hoists or hoists as lifting mechanism components.

 

According to the bridge type, Bridge crane electrification systems is divided into two types: supported type and suspended type. The bridge of the former runs along the crane track on the vehicle beam; the bridge of the latter runs along the crane track suspended under the factory frame.

 

There are two types of Bridge crane electrification systems: manual and electric. The working speed of each mechanism of the manual single-girder bridge crane is low, and the lifting capacity is also small, but its own mass is small, easy to organize production, and the cost is low. It is suitable for use without power supply and the handling volume is not large, and the speed and productivity requirements are not high. occasion.

 

2. Parameters:

 

Lifting Weight(t)	1				2				3				5				10				16				Customized
Span(m)	7.5	10	15	18	8	13	18	27	7.5	12	18	23	8	12	15	18	8	12	15	20	12	19	25	28	Customized
Working Speed (m/min)	Ground 20								Ground 20								Ground20				Ground 20				Customized
Hoisting Height(m) Customized	Customized
Working Class	A4 or Customized
Electric Current	Customized

3. Component:

 

Bridge crane electrification systems consists of a main beam, two end beams, a cart running mechanism, a wire rope electric hoist, and an electrical control system;

 

The main frame of the bridge frame is composed of a main beam and two end beams, and the cart running mechanism is connected by high-strength bolts;

 

The cart running mechanism consists of two motors, two reducers, and four traveling wheels (two active and two driven) installed on both sides of the end beam; Electric wire rope hoist is composed of trolley running mechanism, hoisting mechanism and electrical system; The trolley running mechanism is composed of a motor, a reducer, a small wheel, and an electrical control system. It is installed under the main beam of the bridge machine to move left and right along the main beam, and the normal speed is 20m/min;

 

The hoisting mechanism (electric wire rope hoist) is composed of a motor, a reducer, a drum and a casing, a wire rope, a hook, and an electric device. It is installed under the running trolley for ascending and descending operation, and there are two forms of single-speed and double-speed;

 

The electrical control system consists of the main engine cart control box, electric hoist control box, overload limiter, break fire limiter, travel switch, remote control, collector, seamless sliding contact line, drop wheel, tow cable, wire drawing, rope buckles, flange bolts and other accessories;

 

In addition to the above configurations, Our Bridge crane electrification systems is Fitted with Advanced Safety Features, Including a load limit switch, overloading proposition, and door interlock. Hat The Crane Stops Working Immediaately When it reaches ites load capacity, this preventing academents and damages.

 

4. Applicable Environment:

 

Bridge crane electrification systems are widely used in workshops, factories, warehouses, stockyards, industrial and mining enterprises, iron and steel chemicals, railway transportation, ports and other occasions to lift goods.

 

This type of overhead crane is specially created to cater to a broad range of material-handling needs, and it is widely used in various industries, including construction, manufacturing, and mining.

 

 

5. How to operate?

 

Bridge crane electrification systems has two types of operation on the ground

 

Please Click Here To Know More.

 

6. Transportation:

7. Frequently Asked Questions

 

(1) What's your MOQ?

1 Set;

 

(2) How long can we provide design solutions？

Less than 24 hours;

 

(3) What's your warranty period?

12 months from winches accepted;

 

(4) Could your winches drag inclined?

No.

 

......(Click Here To Know More)

 

Bridge crane electrification systems is an excellent option for companies that require a reliable and durable crane capable of handling heavy loads. It is affordable, customizable, and built with the best quality materials, making it an excellent addition to any production line. We invite interested clients to contact us for more information on this excellent product.

 

Hot Tags: bridge crane electrification systems, China bridge crane electrification systems suppliers, manufacturers, factory