On March 16, 2 Tons Of MD Were Sent To New Zealand
Mar 16, 2023
On March 16, 2 tons of MD were sent to New Zealand
Product information: Two-speed electric wire rope hoist
Lifting capacity: 2 tons
Lifting height: 6 m
Operation mode: wireless remote control + handle
The structure and characteristics of the wire rope electric hoist: the machine adopts the design of electromechanical integration, and the wire rope of different specifications can be pressed by changing different molds. It is easy to operate and safe; it is convenient to check, install and maintain the motor. Its main disadvantages are poor heat dissipation conditions of the motor, poor grouping, and complicated power supply devices, manufacturing and assembly.
Classification and description of wire rope electric hoist The components of the wire rope electric hoist are: motor, transmission mechanism, reel and sprocket.
According to the different positions of the motor and the reel, it can be roughly divided into four types. The pressed steel wire rope has strong pulling force, beautiful appearance and fast speed. It only takes a few minutes to crimp a set of steel wire rope, which greatly reduces labor intensity and improves work efficiency.
The electric hoist with the motor installed outside the reel has the advantages of good grouping, high degree of generalization, easy change of lifting height, and convenient installation and inspection.
Electric power hoists are often used on monorail cranes, jib cranes and moving single-beam cranes. Because of their simple structure, convenient manufacture and maintenance, good interchangeability, and easy operation, they are widely used in factories.
If used improperly, it will cause casualties. Therefore, in addition to training and operating with a certificate according to regulations, electric hoist operators must also strictly abide by the following operating rules:
(1) Before starting, carefully check whether the machinery, electricity, wire ropes, lifting clamps, limiters, etc. of the equipment are in good condition and reliable.
(2) Do not overload lifting. When lifting. Hands are not allowed to be held between the rope and the object. Be careful not to touch the building when the hanging object rises.
(3) When lifting objects, you must abide by the safety operating procedures of the hook lifting industry. When binding, it should be firm, and the sharp corner gap of the object should be protected by a pad.
(4) Use the electrical switch of the towing line to start. Insulation must be good. Press the button correctly and pay attention to the standing position when operating.
(5) When the monorail electric hoist is at the turn of the track or near the end of the track, it must run at a reduced speed.
(6) Any electric hoist with an operating room must be operated by a special person, and strictly abide by the safety and gold operating procedures of the driver.
