Gantry Kran
Gantry kran with electric wire rope hoist only have a leg on one side and a leg on the other side running on the workshop or trestle bridge. In order to expand the scope of crane operation, the main girder can extend to one side or both sides to extend the leg to form a cantilever. It is used together with CD, MD and other models of electric hoist. The hoist runs on i-beam and the crane is a small and medium-sized crane.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Gantry kran with electric wire rope hoist only have a leg on one side and a leg on the other side running on the workshop or trestle bridge. In order to expand the scope of crane operation, the main girder can extend to one side or both sides to extend the leg to form a cantilever. It is used together with CD, MD and other models of electric hoist. The hoist runs on i-beam and the crane is a small and medium-sized crane.
The Gantry kran with electric wire rope hoist consists of the door frame (girder, leg and the lower beam, etc.), electric hoist, crane operation mechanism and electric control parts. The hoisting, transverse and longitudinal movement all have limited switch protection or buffer device, and is equipped with windproof clamp rail safety device. Working class is A3, there are two operating types , ground control and cabin control. If there are special requirements for weight lifting and other parameters, we can customize them according to the user's needs.
2. Parameters:
|
Lifting Capacity(t) |
3 |
5 |
10 |
16 |
20 |
||||||||||||||||||||
|
Span(m) Customized |
12 |
16 |
20 |
24 |
12 |
16 |
20 |
24 |
12 |
16 |
20 |
24 |
30 |
12 |
16 |
20 |
24 |
30 |
12 |
16 |
20 |
24 |
30 |
||
|
Lifting Height(m) |
6/9 |
6/9 |
6/9 |
6/9 |
6/9 |
||||||||||||||||||||
|
Travelling Speed(m/min) |
Ground |
20 |
20 |
20 |
20 |
20 |
|||||||||||||||||||
|
|
Controlling Room |
20/30/45 |
20/30 |
20/30 |
20/30 |
20/30 |
|||||||||||||||||||
|
Working Class |
A3-A4 |
||||||||||||||||||||||||
|
Electric Current |
Three-phase AC 380V 50Hz |
||||||||||||||||||||||||
3. Component:
Electrical equipment, The operating motor used is in the form of a conical rotor motor, with electrical control, The electric hoist and the whole set of Gantry kran with electric wire rope hoists are equipped with safety devices, such as lifting limit switch, end limit switch, etc.
4. Applicable Environment:
This machine is suitable for open-air fixed workshops in various fields, mines and enterprises. The same applicable environment as Single Girder Gantry Crane With winch Trolley.
5. Wearing Parts：
Rope guide, Carbon brusher
6. How to operate a Gantry kran with electric wire rope hoist?
Customer customization
7. Transportation:
8. Safey Features of Our Gantry kran with electric wire rope hoist:
1.Crane traveling limit switch
2.Weight overload protection device
3.Lifting height limit device
4.Voltage lower protection function
5.Phase sequence protection function
6.Warning indicator: flashing lights and warning sound.
7.Emergency stop function
8.Rain cover for outside hoist, driving units, electrical cubicle.
9.Wireless infra-detector for anti-collusion
Hot Tags: gantry kran, China gantry kran suppliers, manufacturers, factory
