Rubber Tyred Bridge Rail Gantry Crane Lifting Equipment With Grab Bucket

The difference between the Gantry Crane lifting equipment with Grab Bucket and the Double Girder Rubber Tired Gantry Crane lies in its spreader, The spreader of the ordinary tire gantry crane is the hook, The spreader of the grab rubber-tired gantry crane is a grab, It enables the tire gantry crane to grab all kinds of loose deposits, such as ore, coal, slag, etc. for loading, unloading, light stacking, feeding and other operations, and at the same time, it can transfer operations and increase the working area of the equipment. . The work level can reach A3-A8.

2. Parameters:

3. Component:

Rubber Tired bridge rail Gantry Crane lifting equipment with Grab Bucket is composed of a gantry bracket, a power transmission system, a hoisting mechanism, and a cart operating mechanism. The crane can walk freely without laying the track, and can be steered, the operation is flexible and the use is convenient.

Consistent with Double Girder Rubber Tired Gantry Crane, it adopts a special chassis, with a short body and flexible operation movement. When the crane needs to be turned, each wheel frame can be synchronously turned or turned independently, and when turning, it can be turned on the spot, not limited to turning during walking.

The difference is that on the double drum winch, one group of reels leads a wire rope for supporting use, and the other group leads one for opening and closing. After the grab is half-opened, it falls on the object, closes the opening and closing wire rope, and the wire rope pulls the beam to close the two palate plates. The bucket is full of materials, the lifting support wire rope lifts the grab bucket, and it is sent to the unloading site by traveling vehicle. The support wire rope does not move, and the loose opening and closing rope is opened with a grab bucket to unload the captured material.

4. Applicable Environment:

Rubber Tired bridge rail Gantry Crane lifting equipment with Grab Bucket are widely used in ports, power plants, wharfs, chemical industries, etc., to grab all kinds of loose deposits, Such as: ore, coal, slag, etc. for loading, unloading, light stacking, feeding and other operations. Gantry cranes unload bulk cargoes such as coal, ores and phosphates from holds into hoppers and then via conveyor belts to storage yards or loading bays.

5. Wearing Parts:

6. Transportation:

7. How to operate?

8. Precautions for use:

(1) Carry out the "ten do not hoist" safety regulations for tire hoisting operations: do not hoist if overloaded; do not hoist when someone is under the sling; do not hoist if the instructions are unclear; do not hoist if the hoisting device is not correct or firm; do not hoist if the line of sight is unclear; do not hoist without confirmation, If the binding is not firm, it is not hoisted, the goods are too full and there is a danger of being scattered, and the safety device is not complete or the action is insensitive or invalid.

(2) Tire crane drivers should shift gears in advance to decelerate when stopping the action of each mechanism, and are not allowed to simply rely on the travel switch and limiter to prompt to stop the action of each mechanism.

(3) The communication equipment on the tire hoist can only be used as a work contact, and cannot be used for other purposes.

(4) Do not move the fire extinguisher equipped on the tire hoist and ensure its effectiveness.

Hot Tags: rubber tyred bridge rail gantry crane lifting equipment with grab bucket, China rubber tyred bridge rail gantry crane lifting equipment with grab bucket suppliers, manufacturers, factory