Roll Lifting C Hook

The C-type spreader is mainly used for the horizontal lifting of the coiled plate.

Because its shape resembles the literal C, it is called the C-type spreader.

It has a range of loads: 0-22 tons and is made of low-carbon high-quality alloys.

2. Classification

C-type spreaders are mostly used for lifting steel coils, aluminum coils, copper coils, wire rods and other coils; C-type spreaders are divided into veneer type (applied to the machine slot), I type, box type, cylindrical type (Apply to wire hoisting).

According to the needs of users, the C-type spreader can add protective measures at the contact position between the spreader and the object to be lifted, such as: rubber, nylon board, and aluminum board, polyurethane, rubber pad and so on.

3. Component:

The C-type spreader is mainly composed of a hanging body and a counterweight iron.

Lifting details: The main part of the C-type spreader is made of steel plates (high-quality low-alloy steel) and steel pipes.

Counterweight iron: It plays the role of adjusting the balance of the spreader, so that the center of gravity of the spreader and the object to be lifted are in a line.

4. Correct daily maintenance and maintenance

The used C-type spreader must be placed on a special shelf, stored in a ventilated, dry and clean workshop, and kept by a special person.

The surface of the C-type spreader should always be protected against rust, and it is not allowed to store in acid, alkali, salt, chemical gas and humid environment.

C-type spreaders are not allowed to be stored in high temperature areas.

Regularly clean the rotating parts and lubricate regularly to prevent dry friction and jamming.

5. Parameters required for customization

The force balance of the C-type hook needs to fully consider the upward pulling force of the hook, the weight of the steel coil and the downward force of the spreader's own weight, so the force of the steel coil should act on the center of the steel coil, and the self-weight of the spreader should act on the center of gravity of the spreader;

The self-weight should also consider the counterweight, which can balance the C-type hook when it is empty.

This requires the customer to report the size (length and maximum diameter and whole diameter) of the steel coil to be hung when ordering, so as to facilitate the determination of the length of the C-type hook and the opening of the hook mouth during production and manufacture, and determine the hanging hook. Point location.

6. Applicable Environment:

It is widely used in hot-rolled strip mills and cold-rolled strip mills in steel mills, as well as in stations, freight yards, docks, and the hoisting of various types of horizontal coils for large coil users.

C-type spreader is one of the necessary lifting tools for steel mills, cold-rolled sheet production and processing enterprises, storage and transportation warehouses and other workplaces that use horizontal steel coils.

C-type hooks are suitable for horizontal lifting of steel coils or wire rods, so they are widely used in steel mills, ports, stacking plants, warehouses and other places.

It is suitable for steel coil handling, steel coil tempering, warehouse storage and stacking, transportation and loading and unloading, etc. The design can be selected according to the requirements of use.

7. Transportation

Hot Tags: roll lifting c hook, China roll lifting c hook suppliers, manufacturers, factory