End Beam Of Single Girder Overhead Crane

The end beam of the crane refers to the running part of the crane, which is connected to the main beam, that is, the place where there are four wheels at both ends of the crane beam, one side is two wheels, one driving wheel and one driven wheel.

2. configure：

(1) A pair (two) beam boxes

(2) Two motors

(3) Two reducers

(4) Four buffers

3. Scope of application

The end beam is used for the traveling of the crane and is one of the main accessories of the bridge gantry crane. The length of the end beam ranges from 1.2 meters to 6 meters for cranes ranging from 0.5 tons to 100 tons.

4. Component:

The crane end beam device includes an end beam, two buffers, a driving wheel mechanism, a passive wheel and a connecting mechanism. The two buffers are respectively fixed on the outer sides of the two ends of the end beam.

The driving wheel mechanism includes a driving wheel, a driving motor and a driving motor protection. Structure, the driving wheel is supported in one end of the end beam through the driving wheel shaft, the driving motor is fixed on one side of the end beam, the passive wheel is supported in the other end of the end beam through the passive wheel shaft, and the end beam is composed of two parallel webs, two sweeps.

The rail plate, the upper cover plate, the lower cover plate and the plurality of rib plates are fixedly connected to form a box structure.

5. Use the environment

6. Transportation

Hot Tags: end beam of single girder overhead crane, China end beam of single girder overhead crane suppliers, manufacturers, factory