How To Maintain 15 Ton Bridge Cranes?

How to Maintain 15 ton Bridge Cranes?

When the hoisting machinery is out of service, if it is not used for a long time, it is necessary to take maintenance measures and maintenance measures to avoid parts decay or shorten the service life, and do a good job in the daily maintenance of the crane.

First, it is necessary to thoroughly clean and repair damaged parts to keep them functioning properly. On the other hand, they should be placed neatly in a moisture-proof room, the ground should be flat, lined with wood, and then covered with cloth to ensure the free entry and exit of each machine. Place the fuel levers in the idle position and each lever in the neutral position.

It is also important how the engine and battery are stored. The engine needs to be filled with diesel and anti-corrosion agents to prevent the fuel tank from rusting. When the engine is stopped, it should be started once a month to form a new oil film when lubricating various parts to avoid mechanical rust. To remove the battery, clean and store it in a dry place. If you use lead-acid batteries, they need to be charged once a month.

There are two ways to deal with and avoid rust. One method is to use touch-up paint when you notice that some of the anti-rust paint has peeled off before storage. If it falls off in a large area, the entire machine needs to be repaired by spray painting. The second method is to apply grease to the painted area and scrape the paint off the machine operating equipment.

For 15 ton Bridge Cranes stored for a long time, in addition to the above conditions, attention should also be paid to maintenance under climatic conditions and preparations for safe maintenance of the lifting machinery. In other words, lifting machinery should not be parked in various complex and changeable places or areas. At the same time, safety maintenance must be strengthened to ensure the safety and durability of the product. Only in this way can we better maintain and maintain the lifting machinery. , for future use.

Hoisting machinery is generally placed in a warehouse with flat and wide obstacles for better maintenance and upkeep. In fact, when the lifting machinery is not in use, maintenance is also a very important task, rather than leaving it in place, which is not conducive to improving the maintenance of mechanical performance and the flexibility of re-operation.

Its overall packaging must use a thick layer of plastic bags, which means that the lifting machinery is naturally exposed to the outside, which is not conducive to maintenance. Under normal circumstances, they are packed in thick plastic bags, which can protect them well from damage and interference from the outside world.

Implement dedicated maintenance, and organize dedicated personnel to inspect and discover problems on the lifting machinery from time to time to understand whether problems will occur during placement. Personnel maintenance implements a responsibility system and a skills maintenance system, including daily maintenance and skill guidance maintenance.

For the safety of lifting machinery, an early warning and monitoring mechanism for lifting machinery should be established to avoid illegal activities by others with ulterior motives. Through the monitor, you can also understand the internal storage status, and then use information technology to improve monitoring.