Custom Bridge Crane

1. Product Introduction:

 

The LDY type custom bridge crane is mainly composed of four parts:the main girder bridge of the crane ,the metallurgical electric hoist ,the crane operating mechanism,and the electrical system. Custom bridge crane has the characteristics of convenient installation and efficient transportation.The operating mechanism adopts a separate driving form and is equipped with a three in one operating motor,which has stable performance,good riqidity,safety and reliability.The main girder of the bridge is made of a hot rolled plate,leveled by the rolling plate,and cut into a whole web plate by the production line. It is welded with I-beam to form a solid web beam.

 

The lifting mechanism is composed of a stable performance special metal wire rope electric hoist, which can stably lift and transport heavy objects, and can move horizontally along the main beam, The crane operating mechanism adopts an H-level insulated three-in-one drive motor, which is tightly assembled and operates without noise. At the same time, high-temperature resistant cables are used to ensure safe and stable power supply.

 

 

2. Parameters:

Lifting Capacity(t)		Customized
Span(m)		19,22,25 or Customized
Lifting Height(m)	Main Hook	Customized	25	24	20	23	24	24
	Auxiliary Hook	Customized	27	26	22	25	26	26
Working Class		A6-A7
Electric Current		Customized

 

3. Component:

The structure of The LDY type custom bridge crane is mainly composed of three parts: bridge frame, metallurgical electric hoist and electrical system.

The bridge is used to support and longitudinally move the load, and is composed of a metal structure and a running mechanism. The metal structure includes the main beam, the end beam and the connection between the main beam and the end beam.

The Metallurgical Electric Hoist is one of the key components of this The LDY type custom bridge crane. It is specifically designed for use in metallurgical plants, where it is exposed to high temperatures, dust, and other contaminants. The hoist is equipped with a specially coated rope, which provides excellent resistance to corrosion and damage. Additionally, the hoist is capable of lifting and lowering heavy loads with precision and ease. 

The running mechanism is composed of four parts: driving device, transmission device, braking device and wheel group. Metallurgical electric hoist bears lifting and lateral moving loads. The electrical system consists of the main circuit and the control circuit. 

 

If the user needs other needs, they should negotiate with our company whether they can use it before signing the contract, and indicate it in the order contract.

 

4. Applicable Environment:
 

The LDY type custom bridge cranes are used in places with low frequency of use or low rated lifting frequency in mechanical manufacturing, assembly, warehouses, etc

 

The LDY type custom bridge cranes are suitable for working in environments with a working level of A6, working environment temperature ≤ 60 ℃, relative humidity ≤ 85%, altitude below 2000m, and no corrosive media.Metallurgical electric single beam crane for metallurgical applications.

5. Wearing Parts:

During the operation and use of The LDY type custom bridge cranes, some simple phenomena that are not faults and cannot be operated often occur.

Generally speaking, parts that are not covered by the warranty period are wearing parts, including: lifting wire ropes, brake, buffer, electrical switches (excluding frequency converters), wires and cables, and rope guides (only for electric hoists). Other mechanical components have a service life, and the design life is generally not less than 5 years.

 

6.The LDY type custom bridge cranes usually use the following common control methods:

 

① Manual operation control:

 

The operator manually controls the lifting, walking, turning and other actions of the equipment through the control cabinet, buttons or joysticks. This control method is common in smaller machinery and is relatively simple to operate, but requires the operator to have corresponding skills and experience.

 

② Console control:

 

The machinery is equipped with an operating console, and the operator can operate and control it through buttons, controllers or touch screens on the console. The operating console usually has more functions and parameter adjustments, which can achieve more accurate operation and monitoring.

 

③ Wireless remote control:

 

The The LDY type custom bridge crane is equipped with a wireless remote control, and the operator can remotely control it through a hand-held remote control. Wireless remote control can be operated at long distances or in hazardous environments.

 

④ PLC automatic control:

 

The machinery uses programmable logic controllers (PLC) for automated control. The PLC control system can perform mechanical operation and action control according to preset programs and logic to achieve automated operation and monitoring. PLC control method is usually used for larger and complex machinery, with high accuracy and stability.

 

The above are common control methods for the LDY type custom bridge cranees. The specific control method used depends on factors such as the size, use, working environment and requirements of the machinery. Different control methods have different characteristics and scope of application. The appropriate control method can be selected according to actual needs to achieve stable operation of the machinery.

 

7. Why choose us?

Punctual delivery time.

 
7*24h online services.

 
Advanced test measures.

 

Hot Tags: custom bridge crane, China custom bridge crane suppliers, manufacturers, factory