Bridge Crane Kiefer

1. Product introduction:

 

In order to meet customers' material handling requirements, Dejun always focuses on quality and product innovation to provide you with high-quality, safe and reliable material handling equipment to achieve our goal, that is, to promote you easily and create more value for customers in the long term. The large tonnage double beam bridge crane kiefer is another successful innovation towards this goal.
 

The double-girder crane is a type of bridge crane that uses a hoisting trolley as the lifting mechanism, is installed on a centrally driven double-rail trolley, and is used in conjunction with the double-girder bridge.

 

2. Parameters of bridge crane kiefer:

General-purpose bridge cranes are widely used in indoor and outdoor warehouses, factories, docks and open-air storage yards. ,The basic parameters of general bridge crane include:

 

1. Rated lifting capacity. When there are main and auxiliary hooks, the rated lifting capacity is expressed as a fraction, the numerator represents the lifting capacity of the main hook, and the denominator represents the lifting capacity of the auxiliary hook.

 

3. Speed. The speed is determined according to the busyness of the crane. The speed for light work is lower and the speed for heavy work is faster. If the lifting capacity is small, the speed can be faster; if the lifting capacity is large, the speed should be slowed down, otherwise it will be detrimental to safety.

 

3. Component:

 

Double-girder bridge crane is mainly composed of bridge frame (commonly known as cart), trolley and metal structure:

(1) The bridge consists of two longitudinal parallel main beams forming a spatial structure; (2) The trolley is rigidly connected to the main beam; (3) The support between the columns of the metal structure is used to suspend the trolley; (4) The metal structure and the main beam are Bolt connection; (5) Wheels are installed on the frames on both sides; (6) Brakes or slippers are installed on the wheels; (7) Lifting weight limiters are installed at both ends of the main beam.

 

4. Applicable Environment:
 

1. Bridge cranes are widely used in factories, warehouses, stockyards and other places to lift goods. They are prohibited from being used in flammable, explosive and corrosive media environments. It has two operation modes: ground and control room. The control room has two types: open type and closed type. It can be divided into two types: left or right installation according to the actual situation. There are two entrance directions: side and end, so as to meet the user's choice under various needs.

 

2. Bridge cranes are widely used in workshops, warehouses, stockyards, etc. in machinery manufacturing workshops, metallurgical workshops, petroleum, petrochemicals, ports, railways, civil aviation, power stations, papermaking, building materials, electronics and other industries.

5. How to clean double girder crane

 

Double-girder cranes have indeed been increasingly integrated into production and life. Many industries require double-girder cranes to complete specific engineering tasks, etc. This has brought a market for double-girder cranes, and in During the operation of the double-girder crane, how to better maintain and maintain it, especially cleaning, is very important.

 

Frequent cleaning can prevent something that is not conducive to the operation of the double-girder crane, thereby maintaining the value of its operation. However, how to clean it requires scientific guidance.

 

Before cleaning the double-girder crane, some impurities and silt should be removed to ensure that the entire large piece of mud and gravel is cleaned. After cleaning the impurities on the double-girder crane, it should be washed with an appropriate amount of water.

 

Specifically, The method can be determined according to the position of the double-girder crane, mainly by spraying water from back to front.

 

Then you should use water pipes such as car washes to clean and carefully clean the entire double-girder crane. This can effectively use the impact of water to clean out the things melted inside. Repeat this several times until the entire The whole body of the double-girder crane is relatively clean.

 

When the overall cleaning work is completed, some effective cleaning substances should also be used to clean the double-girder crane by placing it in water to ensure that it remains in its original condition. In particular, this work must be carried out cyclically on tires and other parts.

 

Generally speaking, cleaning the double-girder crane can keep it clean to avoid being covered in dirt, and also prevent some of its internal parts from being damaged by stones, mud, etc.

 

6.Why should single girder cranes be maintained? These are the reasons!

 

What we often say when using machinery is that it must be properly maintained and maintained, because good care and maintenance are always linked to the performance and failure rate of the machinery. Double-girder cranes are no exception, and their maintenance is even more important. But many people will say that such a large machine must be very delicate in its production, and it shouldn't be a problem even if it is not maintained so frequently. In fact, it is very different. There is a big difference between a crane that is regularly maintained and a crane that is not maintained properly. Moreover, the maintenance of the crane is not only for the use of the machine, but also to increase the safety of use. Proper maintenance and upkeep of the crane can play the following roles:

 

1. Ensure that the crane always has good technical performance, ensure that each institution works normally and reliably, and improve its integrity rate, utilization rate and other management indicators.

 

2. Ensure that the crane has good performance, strengthen the protection of structural parts, maintain reliable connections, normal movement and function of electro-hydraulic components, avoid abnormal vibration due to electromechanical factors, and meet the normal use requirements of the crane.

 

3. Ensure the safe use of the crane.

 

4. Reasonably and effectively extend the service life of the crane.

 

Through the maintenance of double-girder cranes, the repair interval of the crane or mechanism can be effectively extended, including the overhaul cycle, thereby extending the service life of the crane. This is a responsibility not only for the machinery, but also for ourselves.

 

Hot Tags: bridge crane kiefer, China bridge crane kiefer suppliers, manufacturers, factory