2 Ton Lever Chain Hoist
2 ton Lever Chain Hoist is a light and small manual hoist. This small hoist has the advantages of small size, simple operation, time-saving and labor-saving, and easy to carry. It can be used for lifting, pulling, lowering, calibration and other operations.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
1. Product Introduction:
This 2 ton lever chain hoist adopts a light design, which has the advantages of small size, simple operation, time-saving and labor-saving, and easy to carry. As a device that can complete operations such as lifting, pulling, lowering, and calibration, it is widely used in equipment installation, object hoisting, and mechanical parts traction in shipbuilding, electric power, transportation, construction, mining, post and telecommunications and other departments. The lifting capacity of this product is about 0.75 tons, 1.5 tons, 3 tons, and 6 tons. Moreover, in order to ensure the safety of use, we also carried out a dynamic load test on it. Compared with chain hoists, 2-ton lever hoists are more suitable for smaller working environments and can be used for hoisting at various angles.
2. Parameters:
Capacity(T) | 0.5 | 0.75 | 1 | 1.5 | 2 | 3 | 6 | |
Lifting height(m) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
Running test Load(T) | 0.75 | 1.125 | 1.5 | 2.25 | 3 | 4.5 | 9.5 | |
No. of fails of load chain | 1 | 1 | 1 | 1 | 1 | 1 | 2 | |
Load chain diameter(mm) | 5 | 6 | 6 | 8 | 8 | 10 | 10 | |
Demension(mm) | A | 102 | 148 | 148 | 176 | 176 | 195 | 195 |
B | 80 | 87.5 | 87.5 | 102 | 102 | 109 | 109 | |
C | 95 | 135 | 135 | 157 | 157 | 210 | 253 | |
Net.weight(kg) | 3.5 | 7 | 7.5 | 11 | 12 | 19 | 32 | |
3. Component:
The main components of this 2 ton lever chain hoist are: cover, steel sleeve bearing, lifting sprocket, gear shaft, lifting chain, upper chain guide frame, lower chain guide frame, oil hole, lower hook, upper hook, machine Shell, brake seat, friction plate, ratchet, pawl, pawl spring, reversing ratchet, hand wrench inner shell, handle, hand wheel, reversing claw lever, reversing wrench, lower frame, loose pulley.
4. Applicable Environment:
This 2 ton lever chain hoist is widely used in the shipbuilding industry for fast and accurate hull alignment. Its application not only improves the dimensional accuracy and labor productivity of the hull, but also improves the dimensional accuracy and labor productivity of the hull. In addition, this product has a good performance in electric power, agriculture, forestry, factories and mines, construction sites, docks, transportation, etc. It is an indispensable tool for equipment installation, cargo lifting, and object fixing. Especially for pulling at any angle and in tight places, open-air work and no power supply, it has obvious advantages.
5. How to use
(1) Select a lever hoist with a suitable size for use, and overload is strictly prohibited;
(2) Check the safety of the hand lever hoist before using it, and at the same time carry out the no-load test on the hand lever hoist, and adjust the position of the lower hook reasonably according to the actual requirements.
(3) The adjustment method of the lower hook is: turn the dial to make the dial in the "N" position, rotate counterclockwise and pull out the hand wheel. At this time, the clutch is in the open state, and the lower hook can be easily adjusted by pulling out the chain. After adjustment, turn the hand wheel clockwise to restore it to its original position.
(4) After the adjustment, hang the heavy object in the middle position of the lower hook, and pull the handle to realize the lifting of the heavy object.
Hot Tags: 2 ton lever chain hoist, China 2 ton lever chain hoist suppliers, manufacturers, factory
