4 Ton Overhead Crane
4 ton Overhead Crane A suspension crane, also known as a bridge crane or an overhead crane, is a type of lifting device that is commonly used in industrial settings. It consists of a horizontal beam or girder that is supported on two or more end trucks, which are mounted on rails that run...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This 4 ton overhead crane is powered by an electric motor that drives the trolley and end truck. Capable of lifting heavy loads to increase efficiency and reduce the risk of work-related injuries, it is widely used in the manufacturing, construction and shipping industries. This crane can be operated by a single operator or a team of operators and can be customized to suit a wide range of applications. It is available in a variety of configurations, making it suitable for light to medium lifting applications, heavy industry such as steel mills or mounted on wheels or tracks running on the floor for outdoor applications. An essential lifting tool, this crane is designed to be safe, reliable and efficient, aiming to help users increase productivity and simplify operations in a variety of applications.
Specification
| Lifting Weight(t) |
1 |
2 |
3 |
5 |
10 |
Customized |
|||||
|
Span(m) |
Customized |
||||||||||
|
Working Speed |
20 30 |
20 30 |
20 30 |
20 30 |
20 30 |
Customized |
|||||
|
Model of Electric Hoist |
CD1 |
MD1 |
CD1 |
MD1 |
CD1 |
MD1 |
CD1 |
MD1 |
CD1 |
MD1 |
Customized |
|
Hoisting Height(m) |
6 9 12 18 |
6 9 12 18 |
6 9 12 18 |
6 9 12 18 |
6 9 12 18 |
Customized |
|||||
|
Lifting Speed(m/min) |
8 |
8/0.8 |
8 |
8/0.8 |
8 |
8/0.8 |
8 |
8/0.8 |
8 |
8/0.8 |
Customized |
|
Working Class |
A3-A4 |
||||||||||
|
Electric Current |
Customized |
||||||||||
Features
1. The structure design of this crane is very reasonable, and the raw materials provided by top suppliers are used, which is stable, strong and durable.
2. Due to its strong load capacity, this crane can complete many tasks that cannot be done by manpower, which means that the working efficiency will be greatly improved.
3. This crane is very easy to install and use, so the operator does not need to accept long and complicated training to carry out actual operation.
4. This 4 ton overhead crane can be used in construction sites, mines, quarries, sand pans, grain production bases, etc., with high efficiency and safety.
Maintenance points
1. Check and fasten the transmission shaft seat, gearbox, coupling and shaft chain.
2. Check and adjust the gap between the brake and the brake wheel, especially the uniformity and consistency of the gap between the synchronous transmission of the cart and the brake wheel, which requires sensitivity and reliability.
3. Check and adjust the wire rope, winch, hook and pulley for broken wires, cracks and wear.
4. Check whether the adjustment brake is sensitive and reliable.
5. Check the gearbox oil level and oil quality, and add new oil according to the regulations, and at the same time inject an appropriate amount of grease into the bearing seat, brake frame, and coupling.
6. Check whether the limit switch is sensitive and reliable, whether the conductive frame is safe and reliable, remove the singeing part of the electrical box, replace the contacts, and whether the protection device is complete and effective.
7. Check whether the signal lights and telex are effective and reliable.
8. Wipe the appearance of the crane to ensure that there is no accumulation of hair, grease and rust, and replenish the fasteners of each part to keep the equipment clean and intact.
Hot Tags: 4 ton overhead crane, China 4 ton overhead crane suppliers, manufacturers, factory
