Single Hoist Crane

10t single hoist crane

10t single hoist crane is the lifting equipment for lifting materials over the workshop, warehouse and storage yard. It is shaped like a bridge because its two ends are perched on tall cement columns or metal supports. The bridge frame of the bridge crane runs longitudinally along the track laid on both sides of the elevated frame, which can make full use of the space below the bridge to lift materials without being hindered by ground equipment. It is a kind of lifting machinery with a wide range and a large number of uses.

Product Introduction:

Product name: 10t single hoist crane

Lifting capacity: 3-50 tons

Span: 4-40m

Lifting height: 1-40m

Lifting mechanism: wire rope hoist

Control mode: pendant control, wireless remote control, cabin control

Working environment: -25 ℃ ~ 40 ℃

Working class: A3-A7

Power supply: 380v50hz3p or according to customer demand

Single-girder cranes are most widely used in manufacturing, industrial and mining, construction sites, station warehouses; in addition, industrial sectors such as ocean development and aerospace navigation also rely on cranes. It is no exaggeration to say that cranes play a vital role in marine, land, air, civil, military and other fields, assisting and improving the work of all walks of life.
 

In other fields, single-beam lifting machinery is not only used as an auxiliary equipment to complete the transportation and unloading of raw materials, heavy objects, and products, but it is also a necessary equipment and indispensable in the production process operation process. For example, in many aspects of metallurgical production, from charge preparation to charging, and then from casting the molten steel into ingots and demoulding, all are inseparable from crane operations. There are also some operating projects in the atomic energy industry. Without cranes, production would be difficult to carry out.

 

In our country, single-girder cranes account for half of the total number of crane equipment in the metallurgical and coal sectors. This shows the irreplaceable role of cranes in modern production. It can effectively reduce heavy human labor, share the work of staff, improve work efficiency, and further expand production industrialization and mechanization. In the final analysis, it can improve people's material living standards. Therefore, it can be seen from many angles that cranes are of great significance.

 

By the way, let me tell you the key points to pay attention to when operating a crane: first, check the crane pulley to see whether it is worn out, whether it exceeds the standard, and whether the pulley is intact and whether there are cracks, etc.; also check the crane reducer. , check whether there is oil leakage; don't forget to check the steel wire rope of the crane to ensure that the wire rope is not worn, kinked, or rusted. Mark the locations where the wear has been serious to facilitate follow-up and re-inspection.

Safety facilities:

1. Overload protection device

2. High quality long time bearing polyurethane material buffer

3. Crane travel limit switch

4. Lower voltage protection function

5. Stop the system

6. Lift the height limit device

The safe operation and inspection methods of 10t single hoist cranes are described as follows:

1. When the driver takes over, the bridge crane brakes, hooks, wire ropes and safety devices should be checked. Abnormal performance should be eliminated before operation.

2. Before driving, you must ring the doorbell or call the police. An intermittent chime or alarm should also sound when approaching an operator.

3. Operations should be carried out according to command signals. Emergency stop signals, no matter who sends them, should be executed immediately.

4. The power can only be turned off when there is no one confirming the overhead crane or around the overhead crane. If the power circuit breaker is locked or tagged, the main power supply must be removed by appropriate personnel before it can be turned off.

5. Before turning off the main power supply of the bridge crane, all controller handles should be placed at zero.

6. When there is a sudden power outage during work, all controller handles should be returned to zero, and the action of the overhead crane should be checked before resuming work.

7. 10t single hoist cranes working in the open on the track should be anchored when the work is completed. When the wind force is greater than level 6, the work should generally be stopped and the overhead crane should be anchored. For cranes working in coastal areas, such as bridge cranes, when the wind force is greater than level 7, they should stop working and anchor the bridge crane.

8. When the driver performs maintenance on the 10t single hoist crane, he should cut off the main power supply, hang a sign or lock it. If the fault is not eliminated, the replacement driver should be notified.

Hot Tags: single hoist crane, China single hoist crane suppliers, manufacturers, factory